Info:
Item No.:RY17-02
1.Introduction
Due to the defection brought about by the whole design of previous generation“air filled controller" ,we have caused inconvenience
and unnecessary lose to the manufacturer factory in the processing of production .for example:Using mechanical switch detecting the film
size not throttle value,the customer need assembling by themselves due to the separation of the controller and electromagnetic value and
so on.In view of the above questions and the feedback of manufacturer,we especially researched and developed the second generation
product"High Accuracy Film Blowing Width Controller".
This product adopts infrared sensor detection,it should automatic detection the film size which simply mounted the sensor on the outside
of film.Due to adoption noncontact method to detect the film size,so it is not easy to damage and with high accuracy even though it working
perennially,it is simple to install and operate with builtin electromagnetic value and throttle valve (airflow control value), it is the ideal prod uct in film blowing industry and the best choice for replacement.
2.Main function and characteristic
1.Though adjusting the throttle value which can reduce the film size fluctuation so that make the film width consistent , for example:when the film is wide ,the air flow can adjust larger ,or adjust small.
2.When the film broke or less then set value ,it can aeration automatically,if the film not broke,it will up to the set value.
3.When the aeration time more than 3s and not up to the set value ,it will alarm automatically which inform the air flow too low or film
already broke.
4.Equipped with manual air control button
5.Equipped with sensitivity indicator light which can separating the too low ,normal and high three state
6.The whole control circuit,throttle value and electromagnetic value are installed in the controller which make the operate simple and
convenience.
7.Using infrared correlation method detecting the film size which solved the shortage brought about by the mechanical switch
(BF~I airfilled controller adopted mechanical switch)
8.This product adopts singlechip intelligent control which make the control more accuracy.
3.Parameters specification
1、Distinguishability:<0.05mm
2、Aeration start delay time :0.5s
3、Aeration closed delay time:<0.1s
4、Alarm start delay time :3s
5、Pore size :0-3mm adjustable
6、Working air pressure :0.01-0.8Mpa
7、Working voltage:~200-240V\50-60Hz
8、Power:30W
9、Body weight:2.2KG
10、Body size:240*165*85mm(L*W*H)