Item No.:RY09-02
1.
Introduction
RY168 length Measurer is picked up by Hall Switch tested material of drive
rod guide number of laps run lead stick their cumulative transmission figure out the length
of the circumference of the instrument. It can be widely used in printing, compounding,
slitting, winding machines and other needs of the length of the control device.
1, host part of the adoption of SCM control
2, with a compact easy to install
3, with a power failure data storage function
4, can be preset length of the data control relay output
5, can be preset in advance the length of cycle alarm
2.Technical parameters
|
Length measurement range： |
0－999999.99m |
|
Perimeter input range : |
0.001-9.999m |
|
Input signal type: |
Hall close to switch ,contacts,photoelectric switch(NPN) |
|
Display digits: |
6 digits LED can automatic shifting |
|
Output mode: |
one group preset relay output, one group transistor alarm output in advance (DC12V) |
|
Power outage keep: |
>10 years |
|
Reset mode: |
Operation panel key，external switch，automatic |
|
External dimension: |
96×48×115(mm)(width×height×deep) |
|
Installation size: |
92×44×105(mm)(width×height×deep) |
|
Work voltage: |
AC220V±15% 50Hz |
