| Set Home | | Contact Us |
 
Today:
 
 
RY03-DC Motor Torque(Taper)Controller
RY04-AC Toruqe Motor Controller(Board)
RY05-Corona Treatment System
RY06-Corona Processing Frame
RY07-Plasma / Corona Sheet Treater
RY08-Manual,Automatic Tension Controller(Board)
RY09-Correction Controller Series
RY10-DC Motor Speed Regulating Control Board
RY11-Counter,Length Measurer,Counter Wheel
RY12-DC Motor (Intelligent) Controller
RY13-Inverter
RY14-Photoelectric & UltrasonicSensor
RY15-Electrostatic Eliminator,Discharger
RY16-Magnetic Powder Clutch,Brake
RY17-DC,Torque Motor
RY18-Soft Packing Machinery Accessories
 
 
 
 
 
 Product Name:DCCG-200/800W Series DC Speed Regulating Board
 Info:

Item No.:RY10-05

 

I. Introduction    
      DCCG-200/400w series DC motor speed regulating board with silicon control is featured in compact ,easy installation ,high accuracy for speed regulating and low price performance ,it can be widely applied in such industries as wire and cable ,light industry, textile, papermaking ,chemical industry ,printing and dyeing, metallurgy, rubber and plastic ,drawing ,extrusion machinery ,medical equipment ,food  industry and printing packaging and so on .they are also completed with DC motors of permanent magnetic ,separate excitation shunt excitation and serried excitation.   
     It can supply power source for small DC motor to make it run in constant torque and step less speed regulating mode, the main circuit of this device is single –phase bridge type semi-controlling circuit with voltage negative feedback ,current cut –off negative feedback and soft starting etc., which improves an accuracy of speed regulating and retrains starting current. The controlling circuit is a unipolar transistor trigger circuit, and the circuit is simple and its working performance is reliable and steady, the performance of temperature comprehensive is steady,
     External connection control of DCCG including : displacement controller ,Hall dual –speed controller ,NPN or PNP photoelectric switch ,step less control analog output for DC 0-5V from a computer of frequency inerter .Photoelectric switch and displacement sensor can be used at the same time ,taking the place of speed regulating board of TS-200/400W DC motors.
 
2.Technical Parameters
Model
DCCG-200/400W series
Working time
continuous working system
Normal working voltage
AC 220V (±10%)
Output current
2A    2.5A   3.5A  4.5A   intermittent output)
Speed
1:10
Static accuracy
5%
Power for adapted motor
50W-800W
Output Voltage of armature
DC0-220V
 Output voltage of field excitation
DC200V/1A
Exterior dimension (L*W*H)
162*105(+25)*55mm
Wire connecting mode
Terminal type
 
 
 
   

About Us  | Download | Feedback | Contact | E-mail | Manage

 
Add:No.17,Unit 30,Hongbei Garden Ⅱ,ZhouSong North Road,Ruian,Zhejiang ,China 325200
Tel:(86 577)65809661 65619661 013587470606
Fax:(86)577)65809661 65619661-899